Re: [PSUBS-MAILIST] Re: The Dry Divers

Hi Frank,

Can I make a suggestion that you use a 1-1/2” ball valve as you get the seals, the housing, etc and a stainless steel ball with the hole already through it along with seal kits etc already rated. All you have to do is take the stem out and throw it away. We make ball valves and get our balls from Taiwan. However there are now very cheap Italian ball valves and even plastic ones which are good to 250 psi. Just a suggestion. Chs Hugh

Hugh Fulton.

Managing Director

Tel : +64 9 5276055

Mobile: 021 680 174

hfulton@eclipsevalves.com

...........................................................................

Eclipse Valves Ltd. www.eclipsevalves.com

PO Box 18367, Glen Innes, Auckland 1743, NZ.

Tel: +64 9 527 6135. Fax: +64 9 527 4532.

...........................................................................

The information contained in this email is privileged and confidential and is intended for the addressee only.

If you are not the intended receipt you are asked to respect the confidentiality and to not disclose or make use

of its contents. If you have received in error please destroy or contact the sender immediately.

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of ShellyDalg@aol.com
Sent: 20 August 2008 08:28
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Re: The Dry Divers

Hi Vance. I did a little sketch while pondering how it would work. Here's a picture.

http://www.frappr.com/?a=viewphoto&id78526&pid351397&myphotos=1

If you're making one, I want one too. Let me know if there's anything I can do to help.

Already got arthritis, so that's no problem. Frank D.

It's only a deal if it's where you want to go. Find your travel deal here.

__________ Information from ESET NOD32 Antivirus, version of virus signature database 3368 (20080819) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com