[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Venting an Ambient



Hi guys,
             How about trying an air over oil proportional pressure compensating valve. Parker-Hannifin makes them. If the air fails have a Haskel hand pump as backup.
                                                                                       Regards,
                                                                                                     Carl D.

On Sat, Sep 6, 2008 at 2:23 PM, Carlos Del Valle <carlosd072657@gmail.com> wrote:
HI Joe, I'm building an ambient sub and posted the original question.
My worst case scenario would be a pneumatic system failure.
If a high pressure line ruptures, it would immediately fill my ballast tanks.
The ascent rate would far exceed the limits.
I'm installing a 2" ID dump valve in the MBT, and ABT.
My sub/ballast tanks are small, so this should do the trick.
If not, I have a bailout bottle and easy egress
Regards,  Carlos

On Thu, Sep 4, 2008 at 9:59 AM, Joseph Perkel <joeperkel@hotmail.com> wrote:
> Someone asked about venting an ambient.
>
> I found some PVC check valves today which could quite possibly do the trick
> but I think you would have to ask two questions.
>
> What would a cracking pressure of 0.5 to 2 lbs translate to in hull
> overpressure, and how many would be required to dump expansion in an
> emergency ascent from max depth.
>
> Otherwise, these look pretty nifty!
>
> Joe
>



************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
       removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************