[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] Rudder angle indicator
Alan,
Very Cool!!
Jon
Alan James wrote:
Hi all.
My magnetopots ( magnetic potentiometers) arrived today & I was
wrapped with them.
The rotary magnetopot was described by Digi-key as 46mm diameter.
It was actually 65mm, which means it can fit larger shafts. The
internal hole
which is 26mm can also be bored out to 35mm to fit a larger shaft.
All I had to do to water / pressure proof them was to glue a flat
cover on the front.
I did this because I noticed the front was slightly spongy over the
track area.
The wires coming out of it also need potting.
Photos & description are on the projects page.
http://www.psubs.org/projects/1235435392/positionsensor/
Jens, my motors will be rotating through 180 degrees so the
potentiometer will only be moved
through 5k not 10k. My preferred range is from 7.25k to 2.25k but I
can do any 5k range from
10 to 0. How does that work out with your LED indicator? The linear
pot will be going through
the full 10k resistance range so that should be OK with your currant
circuit.
Can I have your schematic for that??? & what would be entailed for it
to work through the 5k
range??
Here's where you find these magnetic pots.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=1967210&FV=fff4001e,fffc0389
<http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=1967210&FV=fff4001e,fffc0389>
Regards Alan
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************