Congratulations Glenn you're flying along.
Wish I was doing as well. However I am enjoying the process
immensely.
I share your sentiments re the American military.
----- Original Message -----
Sent: Wednesday, March 31, 2010 6:43
AM
Subject: Re: [PSUBS-MAILIST] Mig
wire
Hi All
I have finished my K350 thru
hulls,bpods,ctower,hatch,dweights,vports ect and now I am busy welding my ends
on to the pressure hull.I bought a 400 amp mig machine last week and need to
know what the best wire to use I have been advised that E70-6 is good
enough another option seems to be Mil-Mag 713 Dual Shield Flux Core.
Any advice will be most wellcome ,to date I have only used stick E7018
rods and tig 316L ,but I need to get finished.
On another subject I would from the bottom of my heart like to thank all
the American members for your LONG sacrifice you have made be it by
family , friends or taxes in Iraq and Pakistan and other parts of the
world .I am sure most South Africans feel the same way.
All the best
Glen
----- Original Message -----
Sent: Tuesday, March 30, 2010 6:36
PM
Subject: Re: [PSUBS-MAILIST] syntactic
foam
Brian I think it was Mike Caudle with the foam.
On a side note just got a 55 gallon drum of macro spheres. By
the time I use it up I should
know something about molding the stuff.
Dean
Hi,
I can't remember who it is that
has a whole bunch of the syntactic
foam stock piled? It looks
like I'm going to need some to do some fairing
out of some
areas. Cliff mentioned it in Vancouver, since it will not
be
nessesary to mold it, it might be a solution for me - except
to ship it
will probably be ridiculous ! Please let me know
-
Thanks
Brian
************************************************************************
************************************************************************
************************************************************************
The
personal submersibles mailing list complies with the US
Federal
CAN-SPAM Act of 2003. Your email address appears in our
database
because either you, or someone you know, requested you receive
messages
from our organization.
If you want to be removed from
this mailing list simply click on the
link below or send a blank email
message to:
removeme-personal_submersibles@psubs.org
Removal of your email
address from this mailing list occurs by an
automated process and
should be complete within five minutes of
our server receiving your
request.
PSUBS.ORG
PO Box 53
Weare, NH
03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************