[PSUBS-MAILIST] hard tank

[Alan]

Hi Hank,
Just a word of caution with that method,
The HMS Thetis was lost along with 99 persons due to paint clogging a tube
That was used to check whether there was water in the missile bay.
Alan


Sent from my iPad

On 28/08/2013, at 12:37 AM, hank pronk <hanker_20032000 at yahoo.ca> wrote:

> Hi Brian,
> I have the exact same issue with my Nekton sub.  I have limited access, but I plan to pour paint inside the mbt and roll the sub so the paint can coat where I have welded.  
> Hank 
> 
> From: brian <brian at ojaivalleybeefarm.com>
> To: personal_submersibles at psubs.org 
> Sent: Tuesday, August 27, 2013 2:43:56 PM
> Subject: [PSUBS-MAILIST] hard tank
> 
> Hi All,
>                 Very jealous I can't make it to the convention ;-)  !!   I'm going to have a hard ballast tank which will be approx 21" in diameter by 36" long.  I don't  really need to access the inside of the tank and I was wondering how I could seal the inside somehow.  Some type of epoxy coating.  But once I do any welding it will desrtoy any coating.  Any ideas ?  
> 
> Thanks,    Brian 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130828/67c71f41/attachment.html>