[PSUBS-MAILIST] vacuum packed

vbra676539 at aol.com vbra676539 at aol.com
Tue Sep 3 13:00:23 EDT 2013


Finding a inside/outside hatch closure for Captain George's K-250 dome would be a real boon, in my view. It might not have to be quite Deepworker strong, as we aren't lifting the Ks by their hats, so to speak. But we could definitely do with something more user friendly.
Vance


-----Original Message-----
From: Alan <alanlindsayjames at yahoo.com>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Tue, Sep 3, 2013 9:40 am
Subject: Re: [PSUBS-MAILIST] vacuum packed



A while back Emile offered plans for his submarine.
Perhaps there is the option of adopting them over the K boat plans?
Alan

Sent from my iPad

On 3/09/2013, at 6:10 PM, James Frankland <jamesf at guernseysubmarine.com> wrote:



Well, its just an idea\thought.  Im not sure on the legalities of it, but if there was a Kboat replacement, id be happy to make a prototype and test it.  Otherwise i will probably make a new hatch anyway over the winter, seeing as i have the dish.
regards
James  


On 3 September 2013 15:36, <vbra676539 at aol.com> wrote:

We'll need to get Jon in on this for liability considerations. That said, I think there might be a set of Perry drawings out there (although the hatches are heavier than we need) and aaI have an archive of the Nekton construction drawings that I'm looking for a way to apreserve. If the legal end doesn't bite us, then I'm sure we can figure how to adapt proven technology to our requirements, and then provide the result with the K-plans sold on the site.
Vance



-----Original Message-----
From: James Frankland <jamesf at guernseysubmarine.com>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Tue, Sep 3, 2013 1:45 am
Subject: Re: [PSUBS-MAILIST] vacuum packed



Agree strongly with Vance here, the standard K hatch is rubbish.  If anyone wants to chip in any ideas for a "club design" i'm happy to make it over the winter.  I have a spare dish which was left over from the endcap hole II cut out.  Its just the right size, dished and 13mm thick.
 
Otherwise im probably going to make one anyway (once ive put in a new kitchen at home.. :)
Kind Regards
James 
 

>I do think it would serve us well for someone to design a K-hatch >modified with thru-hatch closure. It is truly nutty to bolt ourselves into a sub >without some way for someone on the outside to help us, should we need >it. Maybe something for the next conference?
 
>Vance

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles





_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles




_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles





_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130903/635498e4/attachment.html>


More information about the Personal_Submersibles mailing list