[PSUBS-MAILIST] vacuum packed

jimtoddpsub at aol.com jimtoddpsub at aol.com
Tue Sep 3 14:24:11 EDT 2013


A small, power saw would be good to have aboard the support vessel as a last resort when it's a choice of saving your dome or your hiney.  Best to solve all issues as far upstream as possible to avoid having to work a remedy downstream.  There's more time and resources to address it in the shop than on a dive. 

It takes a lot more to rip open a steel hatch than acrylic if someone is trapped inside and CO2 is rising. 

Jim


Sent on the Sprint® Now Network from my BlackBerry®

-----Original Message-----
From: hank pronk <hanker_20032000 at yahoo.ca>
Sender: "Personal_Submersibles" <personal_submersibles-bounces at psubs.org>
Date: Tue, 3 Sep 2013 11:03:27 
To: Personal Submersibles General Discussion<personal_submersibles at psubs.org>
Reply-To: hank pronk <hanker_20032000 at yahoo.ca>,
        Personal Submersibles General Discussion
 <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] vacuum packed

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles




More information about the Personal_Submersibles mailing list