[PSUBS-MAILIST] Rubber Glove Penetrator

Alan alanlindsayjames at yahoo.com
Mon Sep 9 14:54:43 EDT 2013


Epoxy would be Ok Jim,
Are you thinking of doing the same?
Alan

Sent from my iPad

On 9/09/2013, at 8:47 PM, JimToddPsub at aol.com wrote:

> Alec,
> Did you take any pictures of the glove or any of the other "innovations"?   Any guesses as to what material they used that didn't melt the glove while it was setting up and curing?
> Jim
>  
> In a message dated 9/9/2013 12:05:00 P.M. Central Daylight Time, alecsmyth at gmail.com writes:
> Douglas,
> 
> Last year I was on vacation and went over to look at a bunch of these at a dive concession. Yours looks impeccable by comparison. You wouldn't believe the things they'd jury-rigged! My favorite was a kitchen glove penetrator. They got a rubber kitchen glove, poked cables out the fingers, and filled the whole thing with resin. They'd also used kitchen gloves fingers to make "housings" for switches. 
> 
> Best,
> 
> Alec
> 
> 
> On Mon, Sep 9, 2013 at 12:53 PM, Douglas Suhr <spiritofcalypso at gmail.com> wrote:
>> Hi Scott, thanks! The water temperature was about 72 degrees and the visibility was 3 to 4 feet. Chautauqua lake is fairly close to us, unfortunately it is not the best waters for diving. The water is very green with algae and the seaweed is a constant fight until you get into the deep water. The lake serves well for testing purposes though. 
>> 
>> The only modification we made was a new pressure cap for the motor housing. This submersible's thruster is not pressure compensated but instead sealed in a 1-atm container. This is of course fine as long as you don't have any leaking, which unfortunately we did when we first purchased the sub. We ended up having to completely remove the motor from the housing, clean and lubricate the motor and replace the relay. Then we had to discover the leak point. Fortunately it wasn't the shaft seal, only the access cap on the housing. We modified a new cap from one we purchased at a marine supply house and haven't experienced any more water intrusion since. I'll tell you though, after all this mess I am much more in favor of pressure compensating than trying to seal a 1-atm container. 
>> 
>> Hope you are coming along nicely with Trustworthy. I can't wait to see her in person at the convention! The photos look very nice, but you know they can never really speak for the real thing. ~ Douglas S.  
>> 
>> 
>> On Mon, Sep 9, 2013 at 9:04 AM, <swaters at waters-ks.com> wrote:
>>> Awesome Douglas!,
>>> How was the water? Did you have to do any mods to the submersible to get it working?
>>> Thanks,
>>> Scott Waters 
>>>  
>>> -------- Original Message --------
>>> Subject: [PSUBS-MAILIST] Labor Day Diving
>>> From: Douglas Suhr <spiritofcalypso at gmail.com>
>>> Date: Sun, September 08, 2013 10:34 am
>>> To: "personal_submersibles at psubs.org" <personal_submersibles at psubs.org>
>>> 
>>> Hi folks, hope you are all as excited as I am about this year's convention, I think it is going to be awesome! Before the convention I wanted to show you my first ambient submersible that I purchased on ebay back in '04 so I took her out diving over the labor day weekend on a check dive. The photos are posted in the album "SNARK II" under my name on the site. I think you'll find the last few photos of the album to be quite comical as well! 
>>> 
>>> I have also posted an album called "K-250 then and now" which features photos of the old K-boat down in Marathon from 1996 as well as 2013. Interesting what 17 years will do to an exposed sub. ~ Douglas S. 
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>> 
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20130909/dff8ddc1/attachment.html>


More information about the Personal_Submersibles mailing list