[PSUBS-MAILIST] K3000 spherical shell calculations

[Sean T. Stevenson]

I am working on it, but it's a hobby project. I am only able to put in small bits of time here and there owing to my other commitments. As soon as I have something that I'm comfortable releasing as a community utility, I'll have Jon set it up on the website.

Sean


On April 14, 2014 1:09:37 PM MDT, swaters at waters-ks.com wrote:
>Sean,
>
>I don't believe I know the geometry. I guess in short term, I am
>looking for the pros and cons on a deep submarine for cylinder with
>ribs compared to a sphere. 
>
> 
>
>Thanks,
>
>Scott Waters 
>
> 
>
>-------- Original Message --------
>Subject: Re: [PSUBS-MAILIST] K3000 spherical shell calculations
>From: "Sean T. Stevenson" <cast55 at telus.net>
>Date: Mon, April 14, 2014 11:24 am
>To: Personal Submersibles General Discussion
><personal_submersibles at psubs.org>
>
>At present, it will calculate stiffened cylindrical hulls in the
>forward direction only. The optimization routine is not properly
>constrained yet. If you already know the geometry you want to use, no
>problem.
>
>Sean
>
>_____________________________________________
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Personal_Submersibles mailing list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140414/a2437ea7/attachment.html>