[PSUBS-MAILIST] wanted

[Alan James via Personal_Submersibles]

Hank,are you just replacing that conical bolt on portion at the front?Alan
      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Wednesday, December 10, 2014 9:01 AM
 Subject: Re: [PSUBS-MAILIST] wanted
   

Alan,
As per ABS rules, the sub can surface on one ballast tank.  Also I could drop the lead weight that is in the front.  I found a company in Calgary (3hr away)  that will blow me a dome 3/8 thick and 3/16 at the apex. I am trying to find a heavier one still, but it's a start.  

Hank --------------------------------------------
On Tue, 12/9/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] wanted
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Tuesday, December 9, 2014, 2:50 PM
 
 Hi
 Hank,these
 people have some options.They have
 a standard 1/4" thick 36" diameter product.
 Are you
 going to be able to get out of your sub should the ballast
 tank break?Plastic
 Domes | Plastic Hemispheres | California Quality Plastics
 Plastic Domes and Spheres
        Plastic
 Domes | Plastic Hemispheres | California
 Quality...Acrylic Domes, Plastic Domes &
 Hemispheres HomePlastic Domes & Hemispheres Plastic
 Domes & Hemis Plastic Spheres Plastic Cylinders Plastic
 Bell Jars Camer...View
 on plastic-domes-spheres...Preview
 by Yahoo  
 Alan
    
    From: hank pronk via
 Personal_Submersibles
 <personal_submersibles at psubs.org>
 
 To:
 personal_submersibles at psubs.org 
  Sent: Wednesday,
 December 10, 2014 8:36 AM
  Subject:
 [PSUBS-MAILIST] wanted
    
 Hi all,
 I am looking for a 36
 in ish dia acrylic dome.  The dome will not be a pressure
 dome.  I intend to remove the front ballast tank from Gamma
 and replace it with an acrylic dome.  The dome will act as
 the new ballast tank.  I discovered that sitting in the
 front of the sub, the visibility is quite acceptable if it
 were not for the steel ballast tank.  
 Any
 leads would be appreciated.
 Hank 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
  
  
 -----Inline Attachment Follows-----


 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20141209/57866c68/attachment-0001.html>