[PSUBS-MAILIST] wanted

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Tue Dec 9 15:32:45 EST 2014


Alan,
I plan to remove the entire tank ahead of the vent valve.
Hank--------------------------------------------
On Tue, 12/9/14, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] wanted
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Tuesday, December 9, 2014, 3:12 PM
 
 Hank,are you
 just replacing that conical bolt on portion at the
 front?Alan
     
    From: hank pronk via
 Personal_Submersibles
 <personal_submersibles at psubs.org>
 
 To: Personal
 Submersibles General Discussion
 <personal_submersibles at psubs.org> 
 
 Sent:
 Wednesday, December 10, 2014 9:01 AM
 
 Subject: Re:
 [PSUBS-MAILIST] wanted
    
 
 Alan,
 As per
 ABS rules, the sub can surface on one ballast tank.  Also I
 could drop the lead weight that is in the front.  I found a
 company in Calgary (3hr away)  that will blow me a dome 3/8
 thick and 3/16 at the apex. I am trying to find a heavier
 one still, but it's a start.  
 
 Hank
 --------------------------------------------
 On Tue, 12/9/14, Alan James via
 Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
  Subject: Re:
 [PSUBS-MAILIST] wanted
  To: "Personal
 Submersibles General Discussion" <personal_submersibles at psubs.org>
  Received: Tuesday, December 9, 2014, 2:50
 PM
  
  Hi
 
 Hank,these
  people have some options.They
 have
  a standard 1/4" thick 36"
 diameter product.
  Are you
 
 going to be able to get out of your sub should the
 ballast
  tank break?Plastic
 
 Domes | Plastic Hemispheres | California Quality Plastics
  Plastic Domes and Spheres
 
        Plastic
  Domes | Plastic
 Hemispheres | California
  Quality...Acrylic
 Domes, Plastic Domes &
  Hemispheres
 HomePlastic Domes & Hemispheres Plastic
 
 Domes & Hemis Plastic Spheres Plastic Cylinders
 Plastic
  Bell Jars Camer...View
  on plastic-domes-spheres...Preview
  by Yahoo  
  Alan
      
     From: hank pronk
 via
  Personal_Submersibles
 
 <personal_submersibles at psubs.org>
  
  To:
  personal_submersibles at psubs.org
 
   Sent: Wednesday,
 
 December 10, 2014 8:36 AM
   Subject:
  [PSUBS-MAILIST] wanted
    
 
  Hi all,
  I am looking for
 a 36
  in ish dia acrylic dome.  The dome
 will not be a pressure
  dome.  I intend to
 remove the front ballast tank from Gamma
 
 and replace it with an acrylic dome.  The dome will act
 as
  the new ballast tank.  I discovered
 that sitting in the
  front of the sub, the
 visibility is quite acceptable if it
  were
 not for the steel ballast tank.  
  Any
  leads would be appreciated.
 
 Hank 
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
  
   
    
  -----Inline Attachment
 Follows-----
 
 
  
 
 _______________________________________________
  Personal_Submersibles mailing list
  Personal_Submersibles at psubs.org
  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
    
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 



More information about the Personal_Submersibles mailing list