[PSUBS-MAILIST] Diver propulsion vehicle project

[vbra676539 at aol.com]

And barring that, how about a 36 volt 3/4 hp PM motor, housing and drive? It would be sweet to cook something DIY up that could be built by a competent home machinist.
Vance



-----Original Message-----
From: Alec Smyth <alecsmyth at gmail.com>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Thu, Jan 23, 2014 9:10 am
Subject: Re: [PSUBS-MAILIST] Diver propulsion vehicle project


Hi Jon,


Welcome! That is a nicely documented project, and very timely since we recently had threads about kort nozzles and magnetic couplers. Quick question... could you tell me what diameter that nozzle (aka shroud) is and how much it and the prop cost? I'm curious about adapting those to trolling motors.




Best,

Alec




On Thu, Jan 23, 2014 at 8:47 AM, Jon Eide Pettersen <jon at pettersen-prod.com> wrote:

Hi!

I'm currently designing and building a diver propulsion vehicle with a magnetically coupled drive. I will use a 48v 500w BLDC motor intended for electric trikes, powered by 4 SLA batteries coupled in series.

I'm posting my progress at my personal website, http://pettersen-prod.com/project/dpv/index.html. 

Anyway, hope you find this interesting! I hope to build a submersible in the future, but this will suffice until I have the funding and knowledge needed :)


Regards, 
Jon Eide Pettersen
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles





_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140123/d462616c/attachment.html>