[PSUBS-MAILIST] Rolled steel

[Steve McQueen via Personal_Submersibles]

Scott, good news.  Prices seem psub friendly here in the Midwest.  I think
this place is a good find as you are the third psuber to maybe use them.

Steve


On Mon, Jun 16, 2014 at 11:22 PM, swaters via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hey guys,
> I got a quote back from Arntzen on a K-250 hull.
> The quote is to roll, tack seam, and reroll to round. 36"diameter and 48"
> long of 1/4" ASME 516 gr 70.
> They will do it for $575 and a 2 week lead time.
> Thanks,
> Scott Waters
>
>
>
>
> Sent from my U.S. Cellular© Smartphone
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140617/e2498478/attachment.html>