[PSUBS-MAILIST] Rolled steel

hank pronk via Personal_Submersibles personal_submersibles at psubs.org
Wed Jun 18 20:19:50 EDT 2014


Scott,
The reason I bought Gamma was not because I couldn't build a sub, I bought it because I can not design a sub.  I paid for the engineering and got a sub with it.
Hank 


On Wednesday, June 18, 2014 7:20:49 PM, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
  


Scott, 
Nice to know someone who has friends at the bank. 
Vance



-----Original Message-----
From: swaters via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Sent: Wed, Jun 18, 2014 7:10 pm
Subject: Re: [PSUBS-MAILIST] Rolled steel


Dan, 
On my first sub I spent about 2 years researching and learning before I ever pulled the trigger on starting a build on the K-350. My plan is similar on my next build for a deep diving sub which is to research untill I am 100% comfortable. I would like to start with a good design and finished prints and then take them to the engineer for reveiw. Enginers charge by the hour and are very expensive. I do this the same way when I am building my 40,000 square foot multi-million dollar stores where I have finished blue prints and store design done before I ever take it to the architect and my last store costs me $22,000 in architect fees. The first new store designI had done was $65,000. Hopefully that lays some insite in what I am doing. I am not going to be building something that is unsafe with unknown factors made from metal from a scrap yard and I am ok spending years researching and planning before I ever order the first part. I do apriciate you making
 sure I am being safe because I know there are lots of psubbers in the past who have not been.  
Thanks, 
Scott Waters 
 
 
 
 
Sent from my U.S. Cellular© Smartphone  
"Dan H. via Personal_Submersibles" <personal_submersibles at psubs.org> wrote:

Scott, 
  
Please don't take this in negative way, and 
understand that we have never meet.  I don't know your skills, the skills 
of your wife, or your end expectations.  I congratulate you on 
recognizing that you're not a good engineer, if in fact you aren't.  Maybe 
you're even better then you think you are. I don't know.  
  
Don't underestimate the planning and work that 
goes into in a sub.   Building any sub is a big undertaking, much less 
one for more then a few hundred feet of depth.  Most of all, don't 
look for cheap engineering.  You most likely won't get what you don't pay 
for.  If you're looking for cheap engineering help the BEST you're 
going to get is CHEAP engineering.  That may be ok with a go 
cart, but not with a sub.   
  
Unless you're confident enough in your own 
engineering skills to do your own design or even alter a pre-engineered design, 
you really should have a certified engineer do the work.  Basically it 
means you're getting something the engineer is willing to stake his reputation 
on.  That SHOULD be good enough to put your life in.  You still 
may be playing with matches, but anything less, and your playing with 
fire.   
  
It's a lot of work and thousands of man hours 
building a sub.  There are plenty of other places to make mistakes in a 
build, and plenty other ways to get hurt in a sub.  If you're going to 
build, don't start out hoping you're doing it safe.  Either have it 
properly engineered or build a design that has been.  That's why 
so many take the less expensive and safe way of building a K 
sub.  The engineering has been properly done and it's stood the test 
of time.  Granted, it's engineered to older standards, but even 
that's far better then cheap engineering.     
  
Even refurbishing a sub isn't a small task if there 
are structural issues. 
  
Just my thoughts on the matter, 
Dan H. 
----- Original Message -----  
>From: swaters via  Personal_Submersibles  
>To: Personal Submersibles General  Discussion  
>Sent: Tuesday, June 17, 2014 8:35 
AM 
>Subject: Re: [PSUBS-MAILIST] Rolled  steel 
>
> 
>For the K-250 that I was looking at buying I believe it would be cheaper  to build new rather than restore. Katy was looking for a sub to restore that  wouldn't be extremely expensive. If the right oprotunity comes up she'll do  it, otherwise she'll build a go cart and help me with my next project of a  deep diving sub. 
>Thanks, 
>Scott Waters 
>
> 
>
> 
>
> 
>
> 
>Sent from my U.S. Cellular©  Smartphone  
>Mark via Personal_Submersibles 
  <personal_submersibles at psubs.org> wrote:
>
>Scott, 
>
> 
>What made you change your mind on the K-250 project?  Are you  looking at designing your own sub? 
>
> 
>Thanks again for providing a quote for the rolled steel.
>
>
>Regards, 
>
>
Mark Widman 
>Director, GDSN & Data Quality 
>GS1 Global, USA 
>mark.widman at gs1.org 
>910-638-5229 
>
> 
>Sent from iPhone.   
>
>On Jun 17, 2014, at 12:12 AM, swaters via Personal_Submersibles 
  <personal_submersibles at psubs.org>  wrote:
>
> 
>Huge, 
>>I was just going off of what the blue prints said for a idea of what  that would cost and several members on psubs asked for me to share the  quote. I don't believe I will be doing the K-250 project anyway.  
>>Thanks, 
>>Scott Waters 
>>
>> 
>>
>> 
>>
>> 
>>
>> 
>>Sent from my U.S. Cellular©  Smartphone  
>>Hugh Fulton via Personal_Submersibles <personal_submersibles at psubs.org>  wrote:
>>
>>Go  with 3/8” thick it doesn’t buckle as much as ¼”   
>>The  guys who welded my 5/16” said that it would have been half the time with  3/8”.  That is why ABS says minimum 3/8” I  believe. 
>>Best,   Hugh   
>>From:Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of swaters via Personal_Submersibles
>>Sent: Tuesday, 17 June 2014 3:22 p.m.
>>To: personal_submersibles at psubs.org
>>Subject: [PSUBS-MAILIST] Rolled steel    
>>Hey guys,  
>>I got a quote back from Arntzen on a K-250  hull.  
>>The quote is to roll, tack seam, and reroll to round.  36"diameter and 48" long of 1/4" ASME 516 gr 70.  
>>They will do it for $575 and a 2 week lead  time.  
>>Thanks,  
>>Scott Waters          
>>Sent from my  U.S. Cellular© Smartphone   
>>
>>
>>__________ Information from ESET NOD32 Antivirus, 
    version of virus signature database 9956 (20140617) __________
>>
>>The 
    message was checked by ESET NOD32 Antivirus.
>>
>>http://www.eset.com/  
>>
>>__________ 
    Information from ESET NOD32 Antivirus, version of virus signature database 
    9956 (20140617) __________
>>
>>The message was checked by ESET NOD32 
    Antivirus.
>>
>>http://www.eset.com/
>>  
>_______________________________________________
>>Personal_Submersibles  mailing list
>>Personal_Submersibles at psubs.org
>>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>   
>
>________________________________
> 
_______________________________________________
>Personal_Submersibles 
  mailing 
  list
>Personal_Submersibles at psubs.org
>http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>   
_______________________________________________
Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles     

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20140618/479c8906/attachment-0001.html>


More information about the Personal_Submersibles mailing list