[PSUBS-MAILIST] printing

[Alec Smyth via Personal_Submersibles]

Hi Hank,

Generally speaking you are limited to relatively small pieces and they take
a long time. It is of course not impossible, but most likely not the most
efficient approach, at any rate with small printers like mine.

Best,

Alec

On Sun, Apr 12, 2015 at 1:32 PM, hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Gamma will need two new opposing manipulators.  I am wondering if it is
> possible to print the arm members.  Is it practical?  I am trying to create
> an almost weightless arm set up.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150412/b6def16c/attachment.html>