[PSUBS-MAILIST] minn-kota cabling to hull

[Jon Wallace via Personal_Submersibles]

Hi James,

I am likely to simply end up potting.  Where did you source your 
blueglobe's and how much did they cost?

Jon


On 4/23/2015 11:32 AM, James Frankland via Personal_Submersibles wrote:
> Hi jon,
> II found some pics.  First one is of how I potted the join from the 
> sub con bulkhead connector.  This is for the lights but the motor is 
> the same.  The wires are soldered and insulated.  Then the rubber pipe 
> slid over the top and the whole thing filled with epoxy.  I said it 
> was basic.
> Also a pic of a possible rotating through hull seal.  I didn't use 
> this in the end as I couldn't get the cable onto the copper pins.  If 
> I had made flat connectors so I could push them on, it would have 
> worked,  I just got fed up and potted it, but I think this idea maybe 
> has merit.  Not sure if the oil inside the through hull would affect 
> the blue globe. Would need testing.
>
> ​
> ​
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150423/5ca95133/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 25795 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150423/5ca95133/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 40996 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150423/5ca95133/attachment-0003.jpe>