[PSUBS-MAILIST] roundness

[hank pronk via Personal_Submersibles]

Sean,
Thank you, that is perfect.
Hank --------------------------------------------
On Fri, 7/24/15, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] roundness
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Friday, July 24, 2015, 12:24 PM
 
 IIRC, 0.005 (1/2 %) R or 0.01 (1 %) D, measured
 using a template spanning 120° of arc. Can check later
 tonight.
 Sean
 
 
 
 
 On July 24, 2015 11:35:08
 AM MDT, hank pronk via Personal_Submersibles
 <personal_submersibles at psubs.org> wrote:
 Hi All,
 Can
 someone tell me the allowable out of roundness percentage is
 for a sphere hull.
 Hank
 
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles