[PSUBS-MAILIST] power test

[Cliff Redus via Personal_Submersibles]

David, I am looking forward to you posting these results.  Are you using
Kort nozzle. Could be interesting.

Cliff

On Mon, Jul 27, 2015 at 8:22 PM, David Colombo via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Hank,
> I just got my thruster adapter tubes completed with Delrin and am waiting
> for the Subconn connectors to arrive. Once I have them the test will begin.
> I'll share the test results when completed. I will be using the Minn Kota
> PWM as part of the the test so I can measure amp draws at different speeds
> and loads and the battery drain time line.
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com
>
>
> On Mon, Jul 27, 2015 at 12:42 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> David,
>> You were going to do some bollard pull  testing with your Minn Kota
>> motor.  Did you ever get around to it.
>> I did a test dive today with two 50 lb thrust Minn Kota's.  I scabbed a
>> couple of brackets under the ballast tanks to mount them.  I am trying to
>> determine what size motors I will need.  The two 50's push Gamma at the
>> same speed as the main 2 hp drive motor.
>> Hank
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150728/5274209a/attachment.html>