[PSUBS-MAILIST] Over Pressure Valve
via Personal_Submersibles
personal_submersibles at psubs.org
Fri Jun 19 23:21:42 EDT 2015
Hi Alan,
Cracking pressure only relates to the pressure differential from one side
of the valve to the other. There's no relevance to absolute pressure.
Jim
In a message dated 6/19/2015 9:45:45 P.M. Central Daylight Time,
personal_submersibles at psubs.org writes:
Hi Jim,
it's a confusing way of looking at it.
If I say that my overpressure valve has a 1psi cracking pressure, everyone
knows
what I am talking about. If I say it has a 15.7psi cracking pressure (1
atm + 1psi)
everybody is going to think I am going to blow my dome off before I
relieve pressure.
You are Americanizing this too much & need to get back to basic Queens
English.
I'll have my pressure gauge set at 0 not 14.7 as it will confuse things.
It's pretty wet here over the Winter. The last 2 years I've escaped to
Thailand for
Dental work & lots of snorkeling. There are some mind blowing snorkeling /
diving spots there.
p.s. Are your tyres feeling flat? :)
Alan
____________________________________
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org
Sent: Saturday, June 20, 2015 1:58 PM
Subject: Re: [PSUBS-MAILIST] Over Pressure Valve
Yup, Alan, that's me. I'm using Psubs vernacular as in a 1ATM sub having
an internal pressure equal to sea level pressure or 1ATM or 14.7 psi
(absolute pressure). You're using the vernacular I use when I'm airing up the
tires on my trailer and say I have 32 psi in the tire (tyre to you). In that
conversation we're referring to differential or gauge pressure. Since
your vessel is an ambient, I can where the confusion would come in.
Now about you guys in NZ having winter in the middle of summer...
JT
In a message dated 6/19/2015 8:42:43 P.M. Central Daylight Time,
personal_submersibles at psubs.org writes:
Hi Jim,
as you were talking of pressures in a range outside of
that of a normal barometer, it was assumed that you were talking
about a normal pressure gauge reading & using standard vernacular.
That's Jim Todd isn't it. I don't want to get too cheeky with the wrong
person:)
Cheers Alan
____________________________________
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org
Sent: Saturday, June 20, 2015 12:52 PM
Subject: Re: [PSUBS-MAILIST] Over Pressure Valve
Hi Alan,
I'm speaking in terms of absolute pressure. That is, pressure at the
surface being 14.7 psi or 1 atm and water pressure at 33 feet deep being 2 atm.
I think you're speaking comparatively as though air pressure at the
surface were 0.0 psi. Right?
Jim
In a message dated 6/19/2015 4:46:04 P.M. Central Daylight Time,
personal_submersibles at psubs.org writes:
Jim,
>>> If the air pressure inside your sub rose to 20 psi or about 1.33 atm,
you would reach equal pressure when you got within 11 feet of the surface.
No 40ft.
Alan
____________________________________
From: via Personal_Submersibles <personal_submersibles at psubs.org>
To: personal_submersibles at psubs.org
Sent: Saturday, June 20, 2015 7:58 AM
Subject: Re: [PSUBS-MAILIST] Over Pressure Valve
John, I hadn't given much thought lately to how the Big Boys handle it.
I've planned to have a small, onboard compressor, but its purpose is to
create under-pressure to seal the domes prior to diving. It's not large
enough to charge the tanks. I'm depending on a portable compressor dockside or
on the support boat for that. A snorkel would be nice even if it extends
just two feet above the hatch or dome. Looking forward to the update on
your 65-footer at the convention.
Hank, that's definitely a sweet setup you have on Gamma. The compressor
recharged the tanks much more quickly than I expected. I don't recall how
low you let them get before recharging. I don't expect to have room
onboard, and the heat generated would be something of a negative in semitropical
conditions.
I wish I knew what the pressure differential was that Captain K.
experienced. Apparently it was small enough that he wasn't aware of it and yet
significant enough to convert his coming tower into a personnel launch tube.
If the air pressure inside your sub rose to 20 psi or about 1.33 atm, you
would reach equal pressure when you got within 11 feet of the surface. Any
depth greater than that and the outside pressure would still be greater
than the inside pressure (no OP). The point being that you would have to have
a lot of excess interior pressure to experience OP at a significant depth.
Wouldn't your ears tell you if you got as high as 20 psi? Monitoring and
alarm systems are a must.
Jim
Personally I think an onboard compressor is a much safer option than an
over pressure valve. There are multiple safety benefits to an onboard
compressor, over pressure being the biggy. With a compressor you can get rid of
the pressure without surfacing and trying to control a perfect ascent.
With the OPV you have to surface a bit and let air out and wait then surface
more and wait and so on. You can't just surface and hope the valve keeps up
with the demand. This is more important for subs with large domes.
The next benefit to a compressor is, if you lost all your air, you surface
by dropping your weight. In my case the weight is small and I would also
drop the thruster and tail assembly. Still, not much sub out of the water.
With the compressor, I can open my vent valve in the hatch and use the
compressor to fill the ballast tanks.
Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
In a message dated 6/19/2015 12:35:49 P.M. Central Daylight Time,
personal_submersibles at psubs.org writes:
Hi Jim:
On the boat if their was an positive pressure while submerged at depth we
started the air compressor and charge the air banks. The other option was
to raise the snorkel to equalize before opening the hatch.
John K.
(203) 414-1000
Sent from my iPhone
> On Jun 19, 2015, at 3:07 AM, via Personal_Submersibles
<personal_submersibles at psubs.org> wrote:
>
> Jim,
>
> Thanks for the mental diagram, that helps imensely. Does any one know
how the big boys, navy subs, deal with over pressure? Has any one had their
OP valve open at depth and if so how much water came in?
>
> Keith T
>
> via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>> Keith,
>>
>> Sorry, I just got home. I was hoping Alec and some others with more
>> experience than I have would chime in as I see has now happened.
There have
>> been some good discussions on OP valves in the past. I think some
have
>> installed a T (on its side) inside the sub so the air enters the
horizontal
>> portion, and any water that comes in goes down to a small trap or into
a tube
>> that leads to a reservoir. Others just use a rag to catch the small
amount
>> of water.
>>
>> Alec, does the OP on the exterior of Snoopy point downward after it
exits
>> at the top?
>>
>> We've also discussed having an air pressure gauge or altimeter set to
zero
>> (1 atm) before diving. If it indicates any pressure above that level
at
>> anytime during your dive, you'll know you'll have an over pressure
situation
>> to deal with as you surface and you'll have an indication of how
severe
>> that will be. We've also discussed various things that could cause an
over
>> pressure condition.
>>
>> Best regards,
>> Jim
>>
>>
>> In a message dated 6/18/2015 7:09:19 P.M. Central Daylight Time,
>> personal_submersibles at psubs.org writes:
>>
>> If it opens when submerged, it is because air is on the way out, and
that
>> prevents water from coming in. Its like blowing through your nose
>> underwater, your nose is open but if you're blowing, you don't get
water in your
>> lungs.
>>
>>
>> Certainly you do get a little water in if you push the valve open
manually
>> while submerged, as a test. Or a few drops if you do so when surfaced
to
>> equalize, as the valve is all wet. But its nothing much.
>>
>>
>>
>> Best,
>>
>> Alec
>>
>>
>>
>> On Thu, Jun 18, 2015 at 7:19 PM, Ken Martindale via
Personal_Submersibles
>> <_personal_submersibles at psubs.org_
(mailto:personal_submersibles at psubs.org)
>>> wrote:
>>
>> TEST!!!
>>
>> -----Original Message-----
>> From: Personal_Submersibles
>> [mailto:_personal_submersibles-bounces at psubs.org_
(mailto:personal_submersibles-bounces at psubs.org) ] On Behalf Of via
>> Personal_Submersib
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
_Personal_Submersibles at psubs.org_ (mailto:Personal_Submersibles at psubs.org)
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
_Personal_Submersibles at psubs.org_ (mailto:Personal_Submersibles at psubs.org)
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
_Personal_Submersibles at psubs.org_ (mailto:Personal_Submersibles at psubs.org)
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150619/dcb6742f/attachment-0001.html>
More information about the Personal_Submersibles
mailing list