[PSUBS-MAILIST] LED lights

[Alec Smyth via Personal_Submersibles]

Same here, my lights are a flat array of LEDs, so not something that would
lend itself to a narrow cylinder. Most LED lights seem to take that
approach. PCB = printed circuit board.

Alec

On Mon, May 18, 2015 at 8:56 PM, Clifford Redus via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Diameter is going to be to small for the LED I used and PCB.
>
> Cliff
>
>
>
> > On May 18, 2015, at 7:48 PM, hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
> >
> > Hi all,
> > I want to upgrade my lights to LED and I know nothing about them.  I
> want to put them inside my Benthos light fixtures because they are
> awesome.  The glass housing is about 1.25 in ID and about 6 in long.  Will
> the LED stuff fit inside that small space.
> > Hank
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150518/1bf8c808/attachment.html>