[PSUBS-MAILIST] LED lights

[hank pronk via Personal_Submersibles]

Just looking on ebay and there are plenty of bulbs that will fit but don't have the brightness.  
Hank --------------------------------------------
On Mon, 5/18/15, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Subject: Re: [PSUBS-MAILIST] LED lights
 To: "Personal Submersibles General Discussion" <personal_submersibles at psubs.org>
 Received: Monday, May 18, 2015, 9:38 PM
 
 Same here,
 my lights are a flat array of LEDs, so not something that
 would lend itself to a narrow cylinder. Most LED lights seem
 to take that approach. PCB = printed circuit board.
 Alec
 On Mon, May 18, 2015 at
 8:56 PM, Clifford Redus via Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 Diameter
 is going to be to small for the LED I used and PCB.
 
 
 
 Cliff
 
 
 
 
 
 
 
 > On May 18, 2015, at 7:48 PM, hank pronk via
 Personal_Submersibles <personal_submersibles at psubs.org>
 wrote:
 
 >
 
 > Hi all,
 
 > I want to upgrade my lights to LED and I know nothing
 about them.  I want to put them inside my Benthos light
 fixtures because they are awesome.  The glass housing is
 about 1.25 in ID and about 6 in long.  Will the LED stuff
 fit inside that small space.
 
 > Hank
 
 > _______________________________________________
 
 > Personal_Submersibles mailing list
 
 > Personal_Submersibles at psubs.org
 
 > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 _______________________________________________
 
 Personal_Submersibles mailing list
 
 Personal_Submersibles at psubs.org
 
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
 
 
 
 -----Inline Attachment Follows-----
 
 _______________________________________________
 Personal_Submersibles mailing list
 Personal_Submersibles at psubs.org
 http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles