[PSUBS-MAILIST] drawings

Hugh Fulton via Personal_Submersibles personal_submersibles at psubs.org
Thu Oct 29 18:00:59 EDT 2015


Hank,

If you have a look at Fig 12.31 in Jerry Stachiw’s Handbook on Acrylics it has a good diagram and the angle is a cone with its centre at the centre of the Sphere so it will depend on the diameter of the hatch and closure.

If it works with Acrylic you can bet that it will do the same on Steel.

Hugh 

 

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of hank pronk via Personal_Submersibles
Sent: Friday, 30 October 2015 10:36 a.m.
To: Personal Submersibles General Discussion
Subject: Re: [PSUBS-MAILIST] drawings

 

Hi Sean,

Whenever I look at a deep dive sub it has conical bearing surfaces.  I have to assume the hatch load is transferred into the hull better with an angled seat so that the load is directed both down and outward.  I can copy what I see in pictures, but I am afraid if I don't have the angle just right it could bind.  I am not concerned about sealing, more how the load transfers into the hull.

Hank

 

 

On Thursday, October 29, 2015 2:00 PM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 

Ah! Sorry, didn't realize but look forward to what you come up with.

 

Alec

 

On Thu, Oct 29, 2015 at 3:18 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Alec,

Thank you very much, that was fast.   What I am looking for though is a deep diver hatch design with a  conical bearing face.  I have some good pictures, but no dimensions or angles etc.  I could also use a drawing of a conical port frame.  

Thanks' again Alec.

Hank

 

 

On Thursday, October 29, 2015 12:48 PM, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 

HI Hank,

 

I've got a big blueprint of a Perry hatch. I'll send you a photo offline - it needs to be full file size for you to see anything, and I don't think it would make it through as an attachment here.

 

 

Best,


Alec

 

On Thu, Oct 29, 2015 at 2:13 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi all,

I am looking for drawings of a Pisces style hatch  or similar.  I would like to copy what is proven instead of starting from scratch.  If anyone can help, I would appreciate it.

Thanks'

Hank


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 

 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 


_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 

 

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151030/8d6d88c0/attachment-0001.html>


More information about the Personal_Submersibles mailing list