[PSUBS-MAILIST] Fw: mould

Alan James via Personal_Submersibles personal_submersibles at psubs.org
Sun Feb 7 16:19:48 EST 2016


Hank,I'm not sure what you are doing here.There is a circle drawn in the middle, is this cut out & will the MBT be fitted around the hatch. As it is the top I am surprized it is flat as the air won't rise to a central point to be exhausted.Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Monday, February 8, 2016 9:58 AM
 Subject: [PSUBS-MAILIST] Fw: mould
   
This is one half of the mould for the MBT slash trawl float house on Elementary 3000  After this part is glassed up, then the bottom portion will be formed and the two halves will be married together.  There will be a second set of moulds to encase the HP and O2 tanks.  This whole process will take me all next week to complete.  Hank

     On Sunday, February 7, 2016 1:53 PM, xxx xxxxx <mp13 at live.ca> wrote:
 

  


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/d0884c96/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0280.jpeg
Type: image/jpeg
Size: 20618 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/d0884c96/attachment-0001.jpeg>


More information about the Personal_Submersibles mailing list