[PSUBS-MAILIST] Fw: mould

[hank pronk via Personal_Submersibles]

Alan,Yes the centre will be cut out and 3 inches of the sphere will protrude.  It is not clear in the picture, but the entire top is sloped 1.5 inches over 19 inches, to allow for venting.Hank 

    On Sunday, February 7, 2016 2:19 PM, Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
 

 Hank,I'm not sure what you are doing here.There is a circle drawn in the middle, is this cut out & will the MBT be fitted around the hatch. As it is the top I am surprized it is flat as the air won't rise to a central point to be exhausted.Alan

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Monday, February 8, 2016 9:58 AM
 Subject: [PSUBS-MAILIST] Fw: mould
  
This is one half of the mould for the MBT slash trawl float house on Elementary 3000  After this part is glassed up, then the bottom portion will be formed and the two halves will be married together.  There will be a second set of moulds to encase the HP and O2 tanks.  This whole process will take me all next week to complete.  Hank

     On Sunday, February 7, 2016 1:53 PM, xxx xxxxx <mp13 at live.ca> wrote:
 

  


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/93043e22/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0280.jpeg
Type: image/jpeg
Size: 20618 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160207/93043e22/attachment-0001.jpeg>