[PSUBS-MAILIST] amp draw

[Alan James via Personal_Submersibles]

Hank,Good thinking, looking at the original wires. Were you basing calculations on a marine wire gauge chart? They are a lot more liberal.I believe the kort nozzles put more load on your motor, in case that has anything to dowith performance.Alan


      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Wednesday, June 22, 2016 10:47 AM
 Subject: [PSUBS-MAILIST] amp draw
   
Hi Alan,I rearranged my electrical system to 48 volts and my motors are now running in the sweet spot for amperage 12.5 each.  That was my target- I am basing the required amp draw by the original wire size in the motor penetrator.Hank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20160622/8b834b29/attachment.html>