[PSUBS-MAILIST] PLC input question

Thu Nov 3 12:06:32 EDT 2016

Alan, for PLC analog input devices, normally they are either 0-5VDC,
0-10VDC or 4-20mA.  You can by analog input modules for the PLC in any of
these flavors.  Most popular are 0-5VDC and 4-20mA.

Cliff

On Thu, Nov 3, 2016 at 12:06 AM, Alan via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> What is the best sensor input to get for a PLC or doesn't it matter.
> The pressure sensors I am coming across have either 0-5V output
> or some amp range.
> Wish I had heard Jon's talk at the last convention. Was that recorded?
> Thanks
> Alan
>
> Sent from my iPad
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161103/1617f0c2/attachment.html>