[PSUBS-MAILIST] PLC input question

Stephen Fordyce via Personal_Submersibles personal_submersibles at psubs.org
Thu Nov 3 19:08:58 EDT 2016


Hi Cliff,
Great work - I could not think of a more exciting high school project than
building a submarine!!  That said, I'm amazing someone hasn't shut it down
for being "too dangerous".

I haven't looked at the K-boat plans for a while, but I also recall some
reading between the lines - I had considered converting them to CAD to make
for a starting point for alterations but never got to around it.  Perhaps
you would considering making them available (with a disclaimer, etc.) for
distribution/sale with the K-boat plans on the PSUBS website.

Cheers,
Steve

On Fri, Nov 4, 2016 at 9:54 AM, Hugh Fulton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi Cliff,
>
>
>
> You have been a busy fellow.  I am most impressed.  Wish you were on my
> project.
>
> Cheers  Hugh
>
>
>
> *From:* Personal_Submersibles [mailto:personal_submersibles-
> bounces at psubs.org] *On Behalf Of *Cliff Redus via Personal_Submersibles
> *Sent:* Friday, 4 November 2016 10:57 AM
> *To:* Personal Submersibles General Discussion
> *Subject:* Re: [PSUBS-MAILIST] PLC input question
>
>
>
> Alan
>
>
>
> Let me know when you get ready to spec the PLC/HMI, I have been really
> happy with the equipment I have using and can share.
>
>
>
> Been working on two Psub projects.  The first is working with a local high
> school on a modified K350 build.  I spent the last two month detailing the
> boat with Autodesk Inventor and now have a pretty complete package of
> drawings and specs for a modern K-350. The original K-350 plans are fairly
> basic and required quite a bit of reading between the lines.  Changes I
> made to the original K-350 design were more battery capacity and larger and
> wider apart battery pods to accommodate, Minn Kota 101 based Kort thrusters
> like I use for my boat, and totally new electronics including PLC and HMI,
> full life support including BIBS and added two more viewports.  The MBT
> system has been totally changed.  I am using two of Hugh Fulton's pneumatic
> pancake style valves to blow the MBTs and am using Swagelok 3-Way valves to
> operate the MBT and VBT.  Team is waiting on final budget approval before
> we pull the trigger on the project.  Team has already received $15K in
> equipment donations.
>
>
>
> On the R300, I am in the process of switching control of the
> compass/pitch/roll sensor which uses RS232 serial communication from  an
> RS232 port on the PLC base to a dedicated PLC  coprocessor.  I have had
> some intermittency issues with this sensor over the years and I am trying
> this to see if this solves the problem.  What I really need is an O Scope
> that has RS232 investigation feature.  With the work on the K-350 project,
> I have just not had any spare time on my boat.  Hope to rectify that
> shortly.  Got a consulting job I have to knock out next week in Oklahoma
> City then I am free for the rest of the year to play with psubs.
>
>
>
> Regards
>
>
>
> Cliff
>
>
>
> On Thu, Nov 3, 2016 at 3:15 PM, Alan James via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> Thanks Cliff,
>
> no doubt I'll have more questions when I start
>
> trying to nail down what PLC, HMI & software.
>
> Have just ordered 2 of those digital to 0-5V converters
>
> for my remote system. Will give an update on them when
>
> they are up & running.
>
> Anything noteworthy on your R300 modifications? (if
>
> you have time for an update.)
>
> Cheers Alan
>
>
> ------------------------------
>
> *From:* Cliff Redus via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Friday, November 4, 2016 5:06 AM
> *Subject:* Re: [PSUBS-MAILIST] PLC input question
>
>
>
> Alan, for PLC analog input devices, normally they are either 0-5VDC,
> 0-10VDC or 4-20mA.  You can by analog input modules for the PLC in any of
> these flavors.  Most popular are 0-5VDC and 4-20mA.
>
>
>
> Cliff
>
>
>
> On Thu, Nov 3, 2016 at 12:06 AM, Alan via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
> What is the best sensor input to get for a PLC or doesn't it matter.
> The pressure sensors I am coming across have either 0-5V output
> or some amp range.
> Wish I had heard Jon's talk at the last convention. Was that recorded?
> Thanks
> Alan
>
> Sent from my iPad
> ______________________________ _________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs. org <Personal_Submersibles at psubs.org>
> http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles
> <http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles>
>
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161104/3b0d7653/attachment.html>


More information about the Personal_Submersibles mailing list