[PSUBS-MAILIST] Scuba Tank DIN connector to JIC

[Mark via Personal_Submersibles]

Hi Sean,

I have four SCUBA tanks mounted on the outside of the sub.  The SCUBA tanks are used to provide/control air for the external ballast tanks.  The air line runs from the SCUBA tank to a thru hull fitting in the sub (to a control valve) and then back out to the ballast tanks.  I need to acquire a connector from the SCUBA DIN to either NPT or JIC.

If I can order a DIN 477 to NPT that would suffice.

Regards,

Mark Widman
910-638-5229

Sent from iPhone.

> On Oct 12, 2016, at 3:15 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> That's an oddball to find as a single piece, but you can certainly find male DIN 477 to e.g. NPT, and adapt that to a NPT/JIC.
> 
> What are you building?
> 
> Sean
> 
> 
>> On October 12, 2016 12:49:50 PM MDT, Mark via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Good afternoon, Psubs team:
>> 
>> Do you know if and where I could purchase a SCUBA tank DIN to JIC connector?  
>> 
>> Regards,
>> 
>> Mark...
>> 910-638-5229
>> 
>> Sent from iPhone.
>> 
>> 
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161012/8a9b8323/attachment.html>