[PSUBS-MAILIST] Scuba Tank DIN connector to JIC

[Mark via Personal_Submersibles]

Thanks Steve,

This is exactly what I'm looking for.
(1/4" m NPT x DIN 300 m)

Sean recommended a DIN 477 connector, is there a difference (DIN 300 vs. DIN 477)?

Lastly, I would like to regulate the air pressure to something more reasonable like 100 or so PSI.  Can you recommend an air pressure regulator?

Regards,

Mark Widman
910-638-5229

Sent from iPhone.

> On Oct 12, 2016, at 10:27 PM, Stephen Fordyce via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Mark,
> I have that sort of thing in my catalogue (TFM Engineering Australia), but being down under, not a lot of point sending them to you in the USA when you get can from the likes of:
> http://www.northshorecompressor.com/products/17B477D22-M-NPT-x-DIN-300-M.htmlhttp://www.northeastscubasupply.com/search.php?search_query=DIN+NPT&Search=
> 
> You might be able to do a bit better if you look around - but avoid the ones with bleeders for your application in case it gets knocked.
> 
> Cheers
> Steve
> 
> 
>> On Thu, Oct 13, 2016 at 6:44 AM, Mark via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Hi Sean,
>> 
>> I have four SCUBA tanks mounted on the outside of the sub.  The SCUBA tanks are used to provide/control air for the external ballast tanks.  The air line runs from the SCUBA tank to a thru hull fitting in the sub (to a control valve) and then back out to the ballast tanks.  I need to acquire a connector from the SCUBA DIN to either NPT or JIC.
>> 
>> If I can order a DIN 477 to NPT that would suffice.
>> 
>> Regards,
>> 
>> Mark Widman
>> 910-638-5229
>> 
>> Sent from iPhone.
>> 
>>> On Oct 12, 2016, at 3:15 PM, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>> 
>>> That's an oddball to find as a single piece, but you can certainly find male DIN 477 to e.g. NPT, and adapt that to a NPT/JIC.
>>> 
>>> What are you building?
>>> 
>>> Sean
>>> 
>>> 
>>>> On October 12, 2016 12:49:50 PM MDT, Mark via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>>> Good afternoon, Psubs team:
>>>> 
>>>> Do you know if and where I could purchase a SCUBA tank DIN to JIC connector?  
>>>> 
>>>> Regards,
>>>> 
>>>> Mark...
>>>> 910-638-5229
>>>> 
>>>> Sent from iPhone.
>>>> 
>>>> 
>>>> Personal_Submersibles mailing list
>>>> Personal_Submersibles at psubs.org
>>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161013/0f2d81ed/attachment-0001.html>