[PSUBS-MAILIST] Electronics contents gauge

[emile via Personal_Submersibles]

The scuba pressure sensors are wireless. Most scuba divers don’t want it as it is unreliable.

 

Best would be to screw a industrial pressure sensor (with ¼ “thread or so) into the penetrator plate and attach a HP line on the outside.

 

 

Br, Emile

 

Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens Alan James via Personal_Submersibles
Verzonden: zondag 30 oktober 2016 21:02
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] Electronics contents gauge

 

Is there a suitable electronic scuba tank contents gauge out there?

I am after something that plugs in to the high pressure port of the

1st stage regulator & has wires off it that I can run through a through

hull so I can display the tank contents pressure on a screen.

Trying to avoid bringing high pressure in to the hull.

An alternative may be to run a high pressure line to a through

hull & have an electronic pressure gauge threaded in to this from the 

inside of the hull. However with the second method, I wouldn't have

a shut off valve if the pressure gauge failed some how.

Alan


 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20161030/63d8d467/attachment.html>