[PSUBS-MAILIST] Test chamber

[via Personal_Submersibles]

Hank,

No progress so far. Still trying. I may end up having to build one and I am guessing it won't be cheap.

Thank you,
Scott Waters

>  -------Original Message-------
>  From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
>  To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
>  Subject: Re: [PSUBS-MAILIST] Test chamber
>  Sent: Sep 09 '16 06:59
>  
>  Scott,
>  How did you make out with a HP test chamber
>  Hank
>  
>  On Thursday, September 1, 2016 12:54 PM, Scott Waters via
>  Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>  
>  I need to buy or make a testing chamber for testing parts for Pisces
>  VI. It needs to go up to 5,000 psi. I need to to be 24" diameter and
>  36" long or bigger. Something pre-made and as low cost as possible is
>  prefered, but I am assuming I will have to make it. Any suggestions?
>  Thank you,
>  Scott Waters
>  
>  Sent from my U.S. Cellular® Smartphone
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>  
>  -------------------------
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>