[PSUBS-MAILIST] Test chamber

[via Personal_Submersibles]

Emile,

It needs to be no smaller than 600mm wide and 900mm long. Operating pressure needs to be 250 Bar

Thank you,
Scott Waters

>  -------Original Message-------
>  From: emile via Personal_Submersibles <personal_submersibles at psubs.org>
>  To: 'Personal Submersibles General Discussion' <personal_submersibles at psubs.org>
>  Subject: Re: [PSUBS-MAILIST] Test chamber
>  Sent: Sep 12 '16 09:12
>  
>  Scott,
>  
>  I will calculate the pressure rating. Within 2 weeks I measure the chamber for the exact dims.
>  directly. What is your absolute minimal dimension?  Price will be approx Euro 1400,- + the shipping of a 500 KG pallet..
>  
>  Emile
>  
>  Oorspronkelijk bericht-----
>  Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] Namens via Personal_Submersibles
>  Verzonden: vrijdag 9 september 2016 18:09
>  Aan: Personal Submersibles General Discussion
>  Onderwerp: Re: [PSUBS-MAILIST] Test chamber
>  
>  Emile,
>  
>  Can you let me know if you can and the size, pressure rating, and cost?
>  
>  Thank you,
>  Scott Waters
>  
>  >  -------Original Message-------
>  >  From: emile via Personal_Submersibles
>  > <personal_submersibles at psubs.org>
>  >  To: 'Personal Submersibles General Discussion'
>  > <personal_submersibles at psubs.org>
>  >  Subject: Re: [PSUBS-MAILIST] Test chamber
>  >  Sent: Sep 09 '16 07:24
>  >  
>  >  I can get my hands on such a test chamber. But don’t know the excact  
>  > size and pressure.  The walls are ok with  about 2”but don’t know  if
>  > the closure will hold 350 Bar.
>  >  
>  >  Emile
>  >  
>  >  VAN: Personal_Submersibles
>  >  [mailto:personal_submersibles-bounces at psubs.org] NAMENS hank pronk
>  > via  Personal_Submersibles
>  >  VERZONDEN: vrijdag 9 september 2016 13:54
>  >  AAN: Personal Submersibles General Discussion
>  >  ONDERWERP: Re: [PSUBS-MAILIST] Test chamber
>  >  
>  >  Scott,
>  >  
>  >  How did you make out with a HP test chamber
>  >  
>  >  Hank
>  >  
>  >  On Thursday, September 1, 2016 12:54 PM, Scott Waters via  
>  > Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>  >  
>  >  I need to buy or make a testing chamber for testing parts for Pisces  
>  > VI. It needs to go up to 5,000 psi. I need to to be 24" diameter and  
>  > 36" long or bigger. Something pre-made and as low cost as possible is  
>  > prefered, but I am assuming I will have to make it. Any suggestions?
>  >  
>  >  Thank you,
>  >  
>  >  Scott Waters
>  >  
>  >  Sent from my U.S. Cellular® Smartphone
>  >  
>  >  _______________________________________________
>  >  Personal_Submersibles mailing list
>  >  Personal_Submersibles at psubs.org
>  >  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>  >  
>  >  -------------------------
>  >  _______________________________________________
>  >  Personal_Submersibles mailing list
>  >  Personal_Submersibles at psubs.org
>  >  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>  >  
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>  
>  
>  _______________________________________________
>  Personal_Submersibles mailing list
>  Personal_Submersibles at psubs.org
>  http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>