[PSUBS-MAILIST] High Pressure Manifold Source

[David Colombo via Personal_Submersibles]

Steve, can you send a link? I'd  like to see if I can fit one into my
design.

On Nov 30, 2017 2:59 PM, "Steve McQueen via Personal_Submersibles" <
personal_submersibles at psubs.org> wrote:

> I am Limited in what I can fabricate so I look for off-the-shelf solutions
> most of the time.
> If you are looking for a high pressure manifold I found the manifolds that
> are being sold for scuba tank and paintball tank filling to be of the right
> rating size and reasonably priced.
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171130/f7b5e668/attachment.html>