[PSUBS-MAILIST] High Pressure Manifold Source

[Steve McQueen via Personal_Submersibles]

David, here is a link but there are several vendors. 
 
http://www.scubacompressor.com/shop/fill-panels-manifolds-c-40.html?osCsid=c042481282d310b478bff8a41de2c588

I am trying the 7 port manifold (MB-4)which will give me a spare port.  The dimensions work for me (4.5"W x 1"D x 2"H).  


Thanks,
Steve

---- David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
> Steve, can you send a link? I'd  like to see if I can fit one into my
> design.
> 
> On Nov 30, 2017 2:59 PM, "Steve McQueen via Personal_Submersibles" <
> personal_submersibles at psubs.org> wrote:
> 
> > I am Limited in what I can fabricate so I look for off-the-shelf solutions
> > most of the time.
> > If you are looking for a high pressure manifold I found the manifolds that
> > are being sold for scuba tank and paintball tank filling to be of the right
> > rating size and reasonably priced.
> >
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >
> >