[PSUBS-MAILIST] sphere construction,

k6fee via Personal_Submersibles personal_submersibles at psubs.org
Wed Jul 12 22:25:00 EDT 2017


Your braver than me. Personally, I wouldn't trust just the adhesive.
Keith T.


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> Date: 7/12/17  6:28 PM  (GMT-08:00) To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> Subject: Re: [PSUBS-MAILIST] sphere construction, 
Kieth,For the sake of weight, I want to strap the sphere, plus it will keep the sphere smooth.   Ideally I would drill through the centre of the rings and counter sink bolts in, but that is a no no.Hank 

    On Wednesday, July 12, 2017 7:09 PM, k6fee via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
  

 Hank,
How about bolting them together along with the glue.
Keith T.


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> Date: 7/12/17  5:50 PM  (GMT-08:00) To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> Subject: [PSUBS-MAILIST] sphere construction, 
Hi all,Today I had an idea that would not have been possible before I had a big lathe.  I can buy a series of 4 inch thick rings and machine them flat, glue them together to create a sphere.  The rings can be machined individually so when glued together I have a sphere.  The beauty of this is I can have additional thickness where I need it, like the hatch land.  The ring that makes up the hatch land can be thicker.Any reason this is a bad idea.Hank_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20170712/28b2331c/attachment.html>


More information about the Personal_Submersibles mailing list