[PSUBS-MAILIST] new gears

[Alan via Personal_Submersibles]

Well done Ian.
I have posted this before. It is of 3d propeller testing done here in Auckland.
Their preference in the end was polycarbonate!
  http://www.3ders.org/articles/20160302-wooden-3d-printed-boat-prop-makers-put-filaments-to-the-test-with-surprising-results.html
Cheers Alan
Sent from my iPad

> On 3/11/2017, at 8:06 AM, irox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Great!  Glad they got there safely.
> 
> Let me know if they work.  If so I'll print up a slightly higher quality set (probably a couple, for spares and destructive testing).  I'll also look into printing a set in nylon.
> 
> You're most welcome.  Thanks for all the videos.
> 
> Cheers!
>  Ian.
> -----Original Message----- 
> From: hank pronk via Personal_Submersibles 
> Sent: Nov 2, 2017 11:30 AM 
> To: Personal Submersibles General Discussion 
> Subject: [PSUBS-MAILIST] new gears 
> 
> Hi Ian,
> The gears you made for me arrived, and they are amazing!  I had no idea the fine detail capability.  The timing is perfect also, as I have just finished the gripper and need the wrist gears to complete the connection.  I might have it put together today for a test.
> Thank you again
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171103/2f2f2c5f/attachment.html>