[PSUBS-MAILIST] new gears

[hank pronk via Personal_Submersibles]

 Ian,The gears seem pretty tough, and I am sure they will stand up due  to the thickness.  They machine nicely also, I was worried when I put the gear in the lathe chuck, but is was fine.  I machined the bore out so it would slide nicely.  Pitty I don't have the wrist drive motor yet ;-(  Hank
    On Thursday, November 2, 2017, 1:06:29 PM MDT, irox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 #yiv3031387229 #yiv3031387229 -- DIV {margin:0px;}#yiv3031387229 
Great!  Glad they got there safely.

Let me know if they work.  If so I'll print up a slightly higher quality set (probably a couple, for spares and destructive testing).  I'll also look into printing a set in nylon.

You're most welcome.  Thanks for all the videos.

Cheers!
 Ian.

-----Original Message-----
From: hank pronk via Personal_Submersibles 
Sent: Nov 2, 2017 11:30 AM
To: Personal Submersibles General Discussion 
Subject: [PSUBS-MAILIST] new gears

Hi Ian,The gears you made for me arrived, and they are amazing!  I had no idea the fine detail capability.  The timing is perfect also, as I have just finished the gripper and need the wrist gears to complete the connection.  I might have it put together today for a test.Thank you againHank
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171103/111d52ea/attachment-0001.html>