[PSUBS-MAILIST] PWM controllers

[Alan via Personal_Submersibles]

Hi Hank,
yes. If you have your speed controller on full speed there would be no
pulsing of the power to the motor, it would be fully on.
You can have full power & no rpm in a stall situation. Most modern
controllers I have seen have current limiting that you can program in;
so in a stall or overloaded situation it would back off the power.
Alan


Sent from my iPad

> On 5/10/2017, at 7:56 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> When a dc motor is speed  controlled with a PWM controller is the motor at full power regardless of rpm?
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171005/90e150c9/attachment.html>