[PSUBS-MAILIST] SeaQuestor CNC begins

[hank pronk via Personal_Submersibles]

 David,Very smart building from the inside out.  We tend to build a hull then let it sit for ages while we make all the bits and pieces.  Hank
    On Sunday, October 8, 2017, 2:05:06 AM MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi David,great stuff. Must feel good getting back in to it & seeingsome progress. Look forward to seeing the cut outs assembled.Alan

Sent from my iPad
On 8/10/2017, at 8:20 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi Guys,
We just CNC'd the station ribs for the full scale mock-up of the SeaQuestor. Nest step is to assemble the puzzle on a rolling platform to start all of the electrical and plumbing rough-ins.

https://youtu.be/XiWSaSF6UT0

Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20171008/64dad1c1/attachment.html>