[PSUBS-MAILIST] (no subject)

[hank pronk via Personal_Submersibles]

Jim,Here is a picture of my pump housing with motor and prop tube.  I did upgrade my pump housing to accept a mechanical seal to maintain my 1,000 foot depth rating.  You can stick with the inexpensive spring loaded mechanical seal.   If you have a lathe etc, then this may not be worth pursuing.Hank  ----- Forwarded Message ----- From: xxx xxxxx <mp13 at live.ca>To: hanker_20032000 at yahoo.ca <hanker_20032000 at yahoo.ca>Sent: Tuesday, August 28, 2018, 6:36:26 AM MDTSubject: 
  
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180828/99d28033/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image 2018-08-28 at 6.35 AM.jpeg
Type: image/jpeg
Size: 26878 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180828/99d28033/attachment-0001.jpeg>