[PSUBS-MAILIST] gel coat nightmare

[hank pronk via Personal_Submersibles]

Brian. My friend thinks you put too much mold release spray on.  He just puts a mist on
Hank

Sent from my iPhone

> On Dec 17, 2018, at 5:36 AM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Brian,
> sorry to see your troubles, but I think you you have a bad chemical reaction rather than lay up thickness problem .  I am having morning coffer with a life long friend  that used to be in the hot tub business.  He made moulds for a living.  I will get the skinny from him for you.
> Hank
> 
> On Sunday, December 16, 2018, 7:48:58 PM MST, Michael Holt via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> A while ago I told about something called Styrospray.  It's a rigid 
> material that seems to be applied with a brush.  It's used for making 
> light things like signs but my application is for a Snark Sunflower (to 
> replace the ABS sheath).  I've not yet tried it.
> 
> It's from industrialpolymers.com
> 
> 
> Mike
> 
> 
> 
> 
> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181217/63387700/attachment.html>