[PSUBS-MAILIST] plug connector

[hank pronk via Personal_Submersibles]

 Alec,Thanks, perfect!Hank
    On Thursday, December 27, 2018, 5:45:31 PM MST, Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi Hank,
Subconn has a 50 amp connector in which the two halves are just a pressure fit unless an optional threaded sleeve is used. I think it would certainly pull apart if you left the sleeve off. Check the “power series” product family on their website:
https://www.macartney.com/what-we-offer/systems-and-products/connectors/subconn/subconn-power-series/
Best,Alec

Sent from my iPhone
On Dec 27, 2018, at 7:22 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Are the wires run through epoxy then ?
Brian

--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Alan via Personal_Submersibles <personal_submersibles at psubs.org>
Subject: Re: [PSUBS-MAILIST] plug connector
Date: Fri, 28 Dec 2018 00:11:43 +0000 (UTC)

 Alan, This is for E3000.  I am more of a make it then buy it kinda guy.  I will look at those RC plugs for ideas.Thanks for the infoHank
    On Thursday, December 27, 2018, 4:45:39 PM MST, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi Hank,not quite following what you are doing.How come only one wire needs to disconnect?Do you mean the occupancy sphere or the escape pod?There are pull apart connectors that have high amps running through themthat they use in the RC World. If you google 5 or 6mm gold connectors you are bound to find them. I wonder if it would be better to connect them, & coat them in some sort ofgrease & shrink tube over the connection. This would waterproof them, stop stray current & still leave them able to pull apart if there is enough force to tear the shrink tubing apart.Alan

On 28/12/2018, at 12:09 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi All, I have to make a 50 amp connector with two pins that will pull apart when the occupant sphere section separates (jettisons)  I use flat trailer plug connectors for all the small stuff.  I grease them up with silicone grease and it has worked perfectly on Gamma.Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  _______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181228/9ecf8c63/attachment.html>