[PSUBS-MAILIST] Emailing: IMG_20180115_210324763[1]

[Gregory Snyder via Personal_Submersibles]

Great looking! 👍 

> On Jan 16, 2018, at 6:07 PM, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> All, I am sharing a photo of my HP manifold build. All my K-250 HP plumbing
> is centralized here. Fits between 2 frames and the whole mounting
> bracket/assembly is easily removed for maintenance. Not too big, but spread
> out enough to easily operate. Fed by 2 independent external scuba  bottles
> through one way check valves. Control output valves to fwd/aft soft ballast
> tanks. Isolation output valve to BIBS. Manifold pressure gauge. 
> 
> I am also locating the O2 flow meter on this mounting bracket.
> <IMG_20180115_210324763[1].jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles