[PSUBS-MAILIST] Emailing: DSCF4218

[Alan via Personal_Submersibles]

Graham,
I did my calculations based on 3/4" wall thickness of your old pods.
Looking at it again, were you saying the old pod was 57&3/4" long
& not 57" long with a wall thickness of 3/4" as I interpreted it.
If so then what is the wall thickness of the old pod thanks.
Cheers Alan

Sent from my iPad

> On 1/08/2018, at 12:43 AM, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Graham,
> that is the calculation for one pod so you'll need that extra weight
> on both pods.
> Alan
> 
> 
> Sent from my iPad
> 
>> On 31/07/2018, at 11:40 PM, graham bayliss via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> Hi Allan 
>> 
>> here is a picture of the sub I have attached 150 lbs of lead to the top of
>> batteries tubes as you can see they are big.
>> 
>> Graham
>> 
>> Your message is ready to be sent with the following file or link
>> attachments:
>> 
>> DSCF4218
>> 
>> 
>> Note: To protect against computer viruses, e-mail programs may prevent
>> sending or receiving certain types of file attachments.  Check your e-mail
>> security settings to determine how attachments are handled.
>> <DSCF4218.jpg>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles