[PSUBS-MAILIST] Brushless Underwater Motors

David Colombo via Personal_Submersibles personal_submersibles at psubs.org
Mon Oct 1 20:45:39 EDT 2018


Hi Alan, That seems like a lot of watts for an arm for a camera mount. How
big is the camera?
Best Regards,
David Colombo

804 College Ave
Santa Rosa, CA. 95404
(707) 536-1424
www.SeaQuestor.com



On Mon, Oct 1, 2018 at 1:14 PM Alan via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Just had these 2 tiny motors delivered from Blue Robotics, California.
> They are brushless outrunner motors that are sealed with epoxy & have
> corrosion resistant bearings. 135 & 359W. The black can rotates & the
> silver
> end is attached via it's 4 threaded holes, either directly to a mount or by
> using a standard radio control bracket. Wires are soldered on to the 3
> pads & sealed with marine epoxy.
> These would be great for rotating a camera or other external functions
> on a sub. They are usually used to power rovs & are sold as a unit with
> kort nozzle & prop.
> Alan
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20181001/2b4a9070/attachment.html>


More information about the Personal_Submersibles mailing list