[PSUBS-MAILIST] epoxy

[Rick Patton via Personal_Submersibles]

Can anyone recommend a good dielectric non shrinking epoxy?
I attached my battery pods to the hull using 3 pieces of 4" schedule 80
pipe that are about 4" long. only the aft pipe goes threw the wall of the
pod and hull and I am using short pieces of 1/2" copper all thread that
will protrude about 2" inside the hull and pod that I will put lugs on that
will transfer the battery power inside the hull and I will fill the void
between pod and hull with an epoxy to seal the two spaces in case of
flooding or possible hydrogen explosion.
Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190312/03e64c73/attachment.html>