[PSUBS-MAILIST] epoxy

[Sean T. Stevenson via Personal_Submersibles]

https://www.mgchemicals.com/products/potting-compounds/epoxy-pottting-compounds/

Sean

-------- Original Message --------
On Mar 12, 2019, 12:29, Rick Patton via Personal_Submersibles wrote:

> Can anyone recommend a good dielectric non shrinking epoxy?
> I attached my battery pods to the hull using 3 pieces of 4" schedule 80 pipe that are about 4" long. only the aft pipe goes threw the wall of the pod and hull and I am using short pieces of 1/2" copper all thread that will protrude about 2" inside the hull and pod that I will put lugs on that will transfer the battery power inside the hull and I will fill the void between pod and hull with an epoxy to seal the two spaces in case of flooding or possible hydrogen explosion.
> Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190312/6c45e3ea/attachment.html>