[PSUBS-MAILIST] buffing

[Jon Wallace via Personal_Submersibles]

 Rick, 
I don't think the pad actually matters all that much but see link for pads I purchased.  Don't mix the compound and pads, use only one compound with each pad.  I used the green pad for the coarse polish and yellow pad for the fine polish.  Speed also doesn't matter in my opinion, I think I used medium speed.  Beware of your surroundings however, a motorized buffer with throw some of the polish around and it's difficult to get off when it dries.  Use a drop cloth or plastic to protect anything in the vicinity that you don't want to get polish on.  As well, the polish will get all over your buffer so will require some cleanup when you are done.
Amazon.com

| 
| 
|  | 
Amazon.com


 |

 |

 |




    On Sunday, June 1, 2025 at 03:35:02 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Jon, the Novus compound that I ordered for cleaning up a viewport should be here in a couple of days and was wondering if there was a certain type of buffing pad you used and should I be concerned about the RPM I use? 
Rick_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250602/b4390ef8/attachment-0001.html>