[PSUBS-MAILIST] buffing

[Rick Patton via Personal_Submersibles]

Thanks Jon. Where are you at with your build?

Rick

On Mon, Jun 2, 2025 at 8:09 AM Jon Wallace via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Rick,
>
> I don't think the pad actually matters all that much but see link for pads
> I purchased.  Don't mix the compound and pads, use only one compound with
> each pad.  I used the green pad for the coarse polish and yellow pad for
> the fine polish.  Speed also doesn't matter in my opinion, I think I used
> medium speed.  Beware of your surroundings however, a motorized buffer with
> throw some of the polish around and it's difficult to get off when it
> dries.  Use a drop cloth or plastic to protect anything in the vicinity
> that you don't want to get polish on.  As well, the polish will get all
> over your buffer so will require some cleanup when you are done.
>
> Amazon.com <https://www.amazon.com/dp/B0C3QYC312>
>
> Amazon.com
>
> <https://www.amazon.com/dp/B0C3QYC312>
>
>
>
> On Sunday, June 1, 2025 at 03:35:02 PM EDT, Rick Patton via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Jon, the Novus compound that I ordered for cleaning up a viewport should
> be here in a couple of days and was wondering if there was a certain type
> of buffing pad you used and should I be concerned about the RPM I use?
>
> Rick
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250602/1497dfe1/attachment.html>