[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Rudder Indicator using 3 Reed Relays



In a message dated 3/27/2010 8:10:29 A.M. Pacific Daylight Time, vbra676539@aol.com writes:
With the same pressure inside and out, it seems that the unit would operate normally.
Vance
Hello again Vance. Here's a little sketch of the "Oil Bladder".
It's just a concept so far but the components will be something much like this.
This bladder will get hooked up to everything that's outside the sub that needs oil compensation. Motors, actuators, and whatever.
The CV Joint Boot is made from the same stuff the other boots are made of. Some kind of flexible plastic. These boots are pretty thick and resist all sorts of chemicals and anything else your car is likely to throw up, including "road salt"
The ones for the actuators were $15 each, and the CV Boot is $12 each. The nice thing here is I can buy a replacement from just about any auto parts store and switch it out in just a few minutes if one gets buggered up. Frank D.